Geovision GV-R1352 Card Reader
The GV-R1352 is a card reader designed to recognize identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-R1352 comes with a weather sealed and IP66 compliant housing for outdoor use.
Key Features
| CPU | 8-bit microprocessor | |
| Frequency | 13.56 MHz for ISO14443A ( MIFARE DESFire , MIFARE Plus and MIFARE Classic ) | |
| Input Rating | 7.5V DC~12V DC, 200mA | |
| Wiegand Interface | Wiegand 26 / 34 bit, distance 100 m (328.1ft), 24 AWG, 13V DC min., 85 °C min | |
| RS-485 | 9,600 bps, connect up to 8 GV-RK1352 / R1352 / DFR1352 units Distance 600 m (1968.50 ft), 24 AWG, 13V DC min., 85 °C min | |
| Power Source | DC 7.5V~12V | |
| LED | Red, Green and Blue LED | |
| Beeper | Buzzer | |
| Color | Black | |
| Supported ID Formats | Reads GID and UID | |
| Operating Temperature | -35 °C ~ 66 °C (-31 °F ~ 150.8 °F) | |
| Operating Humidity | 10 ~ 90% RH (non-condensing) | |
| Dimensions (W x H x D) | 65.80 x 115.6 x 20.5 mm (2.6 x 4.6 x 0.8 in) | |
| Weight | 120 g (0.26 lb) | |
| Ingress Protection | IP66 | |
| Certification | CE, FCC, RoHS, UL, CUL | |
Note:
1. RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
2. UL 294 Attack Class Level 1 depends on other connected equipment.
3. If you are using third-party cards or key fobs, the reader must be under UID mode.
4. Specifications are subject to change without notice.
