Geovision GV-RK1352 Card Reader
The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.
| CPU | 8-bit microprocessor | |
| Frequency | 13.56 MHz for ISO14443A ( MIFARE DESFire , MIFARE Plus and MIFARE Classic ) | |
| Wiegand Interface | Wiegand 26 / 34 bit, distance 100 m (328.1ft), 24 AWG, 13V DC min., 85 °C min | |
| RS-485 | 9,600 bps, connect up to 8 GV-RK1352 units | |
| Input Rating | 7.5V DC~12V DC, 200mA | |
| Power Source | DC 7.5V~12V | |
| Power Consumption | 60 mA | |
| LED | Red, Green and Blue LED | |
| Beeper | Buzzer | |
| Color | Black | |
| Supported ID Formats | Reads GID and UID | |
| Operating Temperature | -35 °C ~ 66°C / -31 °F ~ 150.8 °F | |
| Operating Humidity | 10 ~ 90% RH (non-condensing) | |
| Dimensions (W x H x D) | 95 x 108 x 23 mm (3.74 x 4.25 x 0.91 in) | |
| Weight | 260 g / 0.57 lb | |
| Ingress Protection | IP66 | |
| Certification | CE, FCC, RoHS, UL, CUL | |
Note:
1. RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
2. UL 294 Attack Class Level 1 depends on other connected equipment.
3. If you are using third-party cards or key fobs, the reader must be under UID mode.
4. Specifications are subject to change without notice.
