Menu
Your Cart

Geovision GV-DFR1352 Card Reader

Geovision GV-DFR1352 Card Reader
Geovision GV-DFR1352 Card Reader
Based on 0 reviews. - Write a review
$115.00
  • Stock: 1000
  • Model: GV-DFR1352
  • Weight: 20.00lb
  • Dimensions: 12.00in x 12.00in x 6.00in
  • SKU: GV-DFR1352
  • UPC: GV-DFR1352
  • JAN: GV-DFR1352
  • ISBN: GV-DFR1352
  • MPN: GV-DFR1352
Geovision Geovision
Add to Cart
Buy Now
Add to Wish List Compare this Product

Geovision GV-DFR1352 Card Reader

The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.
 
Key Features
  • Card reader with weather-proof and IP66-compliant housing
  • Wiegand interface supported
  • RS-485 output: 9,600 bps, connect up to 8 GV-DFR1352 units
  • 13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
CPU8-bit microprocessor
Frequency13.56 MHz for ISO14443A ( MIFARE DESFire , MIFARE Plus and MIFARE Classic )
Input Rating7.5V DC~12V DC, 200mA
Wiegand InterfaceWiegand 26 / 34 bit, distance 100 m (328.1ft), 24 AWG, 13V DC min., 85 °C min
RS-4859,600 bps, connect up to 8 GV-RK1352 / R1352 / DFR1352 units
Distance 600 m (1968.50 ft), 24 AWG, 13V DC min., 85 °C min
Power SourceDC 7.5V – 12V
LEDRed, Green and Blue LED
BeeperBuzzer
ColorBlack
Supported ID FormatsReads GID and UID
Operating Temperature-35 °C ~ 66 °C (-31 °F ~ 150.8 °F)
Operating Humidity10 ~ 90% RH (non-condensing)
Dimensions (W x H x D)20.9 x 105.6 x 20.5mm (0.8 x 4.2 x 0.8 in)
Weight80 g (0.17 lb)
Ingress ProtectionIP66
CertificationCE, FCC, RoHS, UL, CUL


Note:
1. RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
2. GID is only supported by GV-DFR1352 (Rev. B) firmware V1.2 or later.
3. UL 294 Attack Class Level 1 depends on other connected equipment.
4. If you are using third-party cards or key fobs, the reader must be under UID mode.
5. Specifications are subject to change without notice.

Write a review

Note: HTML is not translated!
Bad Good
Tags: GV-DFR1352